Baked Ham Recipe with Apples (2024)

FAQs

Should ham be baked covered or uncovered? ›

Bake the ham in the preheated oven, uncovered, for 2 1/2 to 3 hours or until a meat thermometer inserted into the thickest portion registers 140°F, basting every 30 minutes with 1/2 cup of the glaze. Be sure to keep an eye on the ham, and cover it loosely with foil if it starts getting too dark.

How do you bake a ham without drying it out? Spiral cut hams should be covered with aluminum foil to help retain moisture when re heating. You could also place a foil pan with water underneath the ham to create some steam inside the oven to keep everything moist.

The glaze should not be applied until the final hour to 30 minutes, in order to avoid burning the sugars. What you're going to do with the glaze ingredients is just combine most of them into a paste, and then apply it to the ham. After that, the heat in your oven will take care of everything.

Preheat the oven to 350 F. Place the ham on a rack in a large baking pan and add about 1/4- to 1/2 inch of water to the pan. If the ham is labeled "fully cooked" (does not require heating), heat it in the oven for about 10 minutes per pound, or to an internal temperature of 140 F.

Smoked Ham, Uncooked

If you're cooking a smoked ham that has not been pre-cooked (oftentimes labeled as "cook before eating"), you'll need to cook it at 325 degrees F until the internal temperature reaches 145 degrees F.

Place ham, cut/flat side down, on rack in shallow roasting pan; cover tightly with aluminum foil. Heat approximately 18 to 23 minutes per pound until heated through. Remove ham from oven. Glaze as directed below or let stand, covered, 10 minutes before serving.

First, before placing the ham in the oven, wrap the top of the pan with aluminum foil. This helps to retain the moisture that you added as well because the juices won't escape while baking, keeping the area where your ham is cooking moist.

Whether you heat your spiral ham in the slow cooker or oven, all you have to do is open the glaze packet and apply it 30 minutes before your ham is finished cooking. By the time it's ready to serve, you'll have a satiny-glazed ham without any of the time or effort it takes to make a ham glaze.

Water-Cooking

Add water to keep ham covered. Take ham from the pan and while warm, remove the skin and fat as desired. If a sweet coating is desired, sprinkle the fat side with brown sugar and bread crumbs and bake in a 400 degree oven until brown (approximately 15 minutes).

To cook a 10-15 pound bone-in ham, allow 18-20 minutes per pound; to cook a boneless ham weighing around 5-7 pounds, budget about 20 minutes per pound, both until the internal temperature hits 160 degrees Fahrenheit.

How to make cooked ham taste better? ›

Add 1/2-3/4 of a cup of wine or stock to the pan (you don't want the ham swimming in liquid) and throw some aromatics in there—a few whole cloves, some star anise, and cinnamon sticks are all good options. Cover the ham with foil and place in a 250-degree oven until it reaches an internal temperature of 100℉.

Let it sit before baking: Let the ham come to room temperature before cooking to ensure juicer, more evenly cooked meat. Cook it cut-side down: Place the ham cut-side down in your pan to prevent it from drying out while baking.

Cooking Temperature and Time

If the ham is a half ham weighing five to seven pounds, it should heat at 325°F for 22-25 minutes per pound. If it is a whole ham weighing between 10 to 14 pounds, heat the ham at 325°F for 18-20 minutes per pound. The internal temperature should be 140°F.

Whether you are cooking a bone in or boneless ham, pre-heat your oven to 325 degrees. Start by removing the packaging from the ham (and bone guard if you're cooking a bone in ham), and you can rinse the ham before cooking if desired.

Cover it in Foil

The foil traps steam and keeps the meat moist. You don't have to wrap the aluminum foil tightly around the ham because you'll want to be able to check on it later. Instead, simply cover the ham with the foil, tucking it under the lip of the roasting pan.

Roasting pan: A 9x3x13-inch pan is a good size to look for. You'll want a pan that's large enough to fit the ham comfortably without touching the sides. A depth of 3 to 4 inches will help avoid spilling or splashing of hot cooking juices.